Natural Draft Tray Dryer
Product Code : JA-FMAHLE-7318
The Natural Draft Tray Dryer (SKU JA-FMAHLE-7318) studies how moisture is removed from a wet solid by hot air rising through the dryer under natural draft. The material sits on a tray, and its loss of weight is followed over time to give the drying curve. This natural draft tray dryer stands on a 500 x 500 x 750 mm support table and runs on a single-phase 230 V supply, with separate sockets for the heater and the weighing scale.
Specifications
The natural draft tray dryer is listed with a support table of 500 W x 500 D x 750 H mm, a 230 +/- 10 V AC, 50 Hz single-phase supply with a 5 A socket for the weighing scale and a 15 A socket for the heater, and 1 kg of sawdust as the test material. Chamber size and heater rating are confirmed on the quotation.
| Product | Natural Draft Tray Dryer |
| SKU | JA-FMAHLE-7318 |
| Drying mode | Natural draft of hot air |
| Support table | 500 W x 500 D x 750 H mm |
| Electric supply | 230 +/- 10 V AC, 50 Hz, single phase, with earthing |
| Sockets | 5 A three-pin with switch for weighing scale; 15 A three-pin with switch for heater |
| Test material | Sawdust, 1 kg |
| Chamber size and heater rating | Confirmed on the quotation |
Experiments with the natural draft tray dryer
The dryer is used to record the weight of a wet solid against time under natural draft, and to identify the constant-rate and falling-rate periods of drying.
- Drying curve of a wet solid under natural draft
- Constant-rate and falling-rate periods
- Critical moisture content
- Comparison with forced draft drying
Scope of supply and ordering
The listing covers the Natural Draft Tray Dryer with its support table and 1 kg of sawdust. The weighing scale and heater details are confirmed on the quotation. Accessories, spares and quantities are confirmed on the quotation.
MOQ, lead time and packing are confirmed on each quotation for the quantity and the delivery destination. Single set-ups and complete chemical engineering and unit operations laboratories for engineering colleges and polytechnics, including tender orders, are supplied.
Frequently asked questions
What drives the air flow?
Natural draft: the hot air stream rises through the dryer without a fan.
What supply is needed?
Single-phase 230 +/- 10 V AC, 50 Hz, with properly earthed 5 A and 15 A sockets.
What test material is supplied?
1 kg of sawdust.
Related products
- Forced Draft Tray Dryer
- Bubble Cap Distillation Column
- Solid Liquid Extraction Packed Bed Type
- Adsorption in Packed Bed
See the complete fluid mechanics lab equipment range from JaincoLab, where this unit is listed, for flow, hydraulics and unit operations set-ups.
Request a quote
For a quotation on the Natural Draft Tray Dryer, send the quantity, any accessories needed and the delivery destination through the JaincoLab contact page or email [email protected] with SKU JA-FMAHLE-7318. Buying under a laboratory tender? Use our tenders page.
