Methods of Flow Measurement
Product Code : JA-FMAHLE-9991
The Methods of Flow Measurement trainer (SKU JA-FMAHLE-9991), supplied by JaincoLab, compares the common ways of measuring flow in a pipe. Water passes through a Venturi nozzle, an orifice plate flow meter or a measuring nozzle and a rotameter, and six tube manometers show the pressure distribution along each differential-pressure meter. This flow measurement trainer also measures total pressure with a Pitot tube.
Specifications
The flow measurement trainer is specified by a Venturi nozzle with a cross-section of 84 to 338 mm², 10.5° inlet and 4° outlet angles, an orifice plate of 14 mm, a measuring nozzle of 18.5 mm, a rotameter up to 1700 L/h and six tube manometers of 390 mm WC.
| Product | Methods of Flow Measurement |
| SKU | JA-FMAHLE-9991 |
| Venturi nozzle | Cross-section 84 - 338 mm²; inlet angle 10.5°; outlet angle 4° |
| Orifice plate flow meter | Diameter 14 mm |
| Measuring nozzle | Diameter 18.5 mm |
| Rotameter | Max. 1700 L/h |
| Pitot tube | For total pressure |
| Tube manometers | 6, 390 mm WC |
Experiments with the flow measurement trainer
The trainer is used to measure the same flow with several devices, compare their readings and pressure losses, and find the coefficient of discharge of each differential-pressure meter.
- Pressure distribution in a Venturi nozzle, orifice plate and nozzle
- Coefficient of discharge of each meter
- Rotameter reading against differential-pressure methods
- Total pressure measurement with a Pitot tube
Scope of supply and ordering
The listing covers the Methods of Flow Measurement trainer with Venturi nozzle, orifice plate, measuring nozzle, rotameter, Pitot tube and manometers. The water supply or hydraulic bench it runs from is confirmed on the quotation. Accessories, spares and quantities are confirmed on the quotation.
MOQ, lead time and packing are confirmed on each quotation for the quantity and the delivery destination. Single trainers and complete fluid mechanics laboratories for engineering colleges, polytechnics and TVET institutes, including tender orders, are supplied.
Frequently asked questions
Which flow meters are compared?
A Venturi nozzle, an orifice plate flow meter, a measuring nozzle and a rotameter, plus a Pitot tube for total pressure.
What is the rotameter range?
Up to 1700 L/h.
How many manometer tubes are there?
Six tube manometers of 390 mm WC.
Related products
See the complete fluid mechanics lab equipment range from JaincoLab for hydraulics, pipe flow and flow measurement.
Request a quote
For a quotation on the Methods of Flow Measurement trainer, send the quantity, any accessories needed and the delivery destination through the JaincoLab contact page or email [email protected] with SKU JA-FMAHLE-9991. Institutions and contractors buying under a tender can also reach us via the tenders page.
