• +91-85699-09696
  • About
Home » Our Product  » Lab Supplies

categories

Lab Supplies Manufacturer, Suppliers and Exporter in India

Jaincolab Manufacturers is leading Lab Supplies Manufacturer,and supplier and Exporter in India, Algeria (Algiers), Angola (Luanda), Argentina (Buenos Aires), Armenia (Yerevan), Australia(Canberra), Austria (Vienna), Bahrain (Manama), Bangladesh (Dhaka), Bhutan (Thimphu), Bolivia (Sucre), Botswana (Gaborone), Brazil (Brasília), Brunei (Bandar Seri Begawan), Montenegro (Podgorica), Morocco (Rabat), Mozambique (Maputo), Myanmar (Naypyidaw), Namibia (Windhoek), Nepal (Kathmandu), New Zealand (Wellington), Nigeria (Abuja), Oman (Muscat), Palestine (Ramallah), Panama (Panama City), Papua New Guinea (Port Moresby), Paraguay (Asunción), Peru (Lima), Philippines (Manila)¸ Portugal (Lisbon), Qatar (Doha), Rwanda (Kigali), Saudi Arabia (Riyadh), Senegal (Dakar), Serbia (Belgrade), Sierra Leone (Freetown), Slovakia (Bratislava), South Africa (Cape Town) (Pretoria) (Bloemfontein), South Sudan (Juba), Spain (Madrid), Sri Lanka (Sri Jayawardenepura Kotte) (Colombo), Sudan (Khartoum), Syria (Damascus), Tanzania (Dodoma), Thailand (Bangkok), Togo (Lomé), Tonga (Nuku'alofa), Trinidad and Tobago (Port of Spain), Tunisia (Tunis), Turkey (Ankara), Turkmenistan (Ashgabat), Uganda (Kampala), United Arab Emirates (Abu Dhabi), United Kingdom (London), United States (Washington, D.C.)

JaincoLab, the laboratory equipment brand of Jain Scientific Suppliers (Ambala, Haryana, established 1982), manufactures and exports lab supplies — physiology apparatus, working models, measurement instruments and general laboratory accessories — for school, college and research laboratories. Orders can be placed directly against a quotation or through JaincoLab's institutional tender route; browse the models below, or request a quote with your item list, quantities and delivery destination for a full bill of quantities against your syllabus or tender.

Last updated: September 2026.

Jain Scientific Suppliers holds ISO 9001:2015 (quality management) and ISO 14001:2015 (environmental management) certification for its manufacturing operations.

What is Lab Supplies?

Lab Supplies is JaincoLab's mixed range of laboratory accessories and instruments spanning physiology apparatus (plasma extractors, organ jar baths), physics working models (steam engine models, mechanical stop clocks), optical and measurement instruments (student binoculars, TDS meters) and general glassware such as glass syringes. This range is used alongside JaincoLab's wider Laboratory Equipments Supplies range across school, college and research laboratory settings.

Selected Lab Supplies — Model Numbers and Specifications

A sample of specific, currently listed items with their manufacturer product codes and published details, so buyers can compare models directly rather than by category alone:

ProductCodePublished specification
Plasma ExtractorJA-LS-2317Expresses blood components from blood collection bags; the bag sits between a fixed stainless-steel plate and a movable transparent plate under power-spring load
Organ Jar Bath DigitalJA-LS-2396Transparent, chemically welded, leak-proof acrylic bath, 750 ml capacity, complete with uprights, organ and oxygen tubes, capillary tubing and frontal lever
TDS Meter Bench TopJA-LS-4965Bench-top total dissolved solids meter for water quality measurement

Other listed items in this range include Steam Engine Model (JA-LS-4958), Mechanical Stop Clock (JA-LS-4960), Student Binoculars (JA-LS-4961), Glass Syringe (JA-LS-4962) and T.S. Leaf Model — full specifications for these are available on request as part of a quotation.

Applications

SettingTypical use
Physiology / Medical LabBlood plasma extraction and organ bath experiments
Physics / General Science LabWorking-model demonstrations and timing instruments
Water Quality TestingTDS measurement in teaching and field-testing settings

Why Choose JaincoLab

JaincoLab is a direct manufacturer, not a reseller, supplying institutional and tender buyers across India and internationally. Lab Supplies sits within JaincoLab's wider Laboratory Equipments Supplies range, alongside Laboratory Equipment and General Lab Equipment. Schools, colleges and institutions buying on tender or in bulk can review JaincoLab's tender and bulk-order support.

Frequently Asked Questions

Q: What information does JaincoLab need to prepare a quotation for lab supplies?
A: The product names or model codes you need, the quantity of each, and your delivery destination. Quotations are usually issued within 1-2 business days and are typically valid for 15-30 days.

Q: Does JaincoLab supply lab supplies against school, government or institutional tenders?
A: Yes — see JaincoLab's tender and bulk-order support page for institutional and government procurement.

Q: What are the delivery timelines and packing arrangements for lab supplies orders?
A: Standard items are typically delivered within 3-7 business days inside India, with 10-15 working days for bulk or special orders; items are packed with protective cushioning, and export consignments use customs-ready packaging.

Q: How is Lab Supplies different from Laboratory Equipment?
A: Lab Supplies is a mixed accessories range covering physiology apparatus, working models, measurement instruments and glassware. Laboratory Equipment is JaincoLab's larger core range of general-purpose lab instruments and apparatus. Both sit within the wider Laboratory Equipments Supplies category.

Q: Does JaincoLab hold quality or environmental certification for its lab supplies manufacturing?
A: Yes, Jain Scientific Suppliers holds ISO 9001:2015 (quality management) and ISO 14001:2015 (environmental management) certification for its manufacturing operations.

Q: Can JaincoLab provide detailed technical specifications before I order?
A: Yes, model-specific specifications can be confirmed as part of the quotation process. Not every item currently has a downloadable datasheet published on the website, so confirm current specifications directly with JaincoLab before finalising an order.

Request a Quote

For pricing, bulk orders or technical questions on JaincoLab's lab supplies range, contact our team with your item list, quantities and delivery destination.

Plasma Extractor

Plasma Extractor

Product Code : JA-LS-2317

Plasma Extractor (SKU JA-LS-2317): manual spring-loaded plasma extractor pressing a blood bag between a fixed stainless steel plate and a movable transparent plate; 20 N clamping force; 100-400 ml bags; 165 x 250 x 250 mm, 2.5 kg. Supplied by JaincoLab.

Note: Manual spring-loaded plasma extractor for 100 to 400 ml blood bags.

View Details
Organ Jar Bath Digital

Organ Jar Bath Digital

Product Code : JA-LS-2396

Organ Jar Bath Digital (SKU JA-LS-2396): 750 ml leak-proof acrylic organ bath with uprights, organ and oxygen tubes, capillary tubing and frontal lever; immersion heater with microprocessor digital temperature controller.

Note: Digital acrylic organ bath, 750 ml, for isolated tissue experiments in pharmacology.

View Details
Steam Engine Model

Steam Engine Model

Product Code : JA-LS-4958

Steam Engine Model (SKU JA-LS-4958): demonstration model of a steam engine showing its mechanism and components and mimicking the action of a real engine, for physics laboratories. Size and drive are confirmed on the quotation.

Note: Demonstration model of a steam engine for physics teaching.

View Details
Mechanical Stop Clock

Mechanical Stop Clock

Product Code : JA-LS-4960

Mechanical Stop Clock (SKU JA-LS-4960): portable mechanical stop clock with start and stop lever, seconds and minutes pointers on the dial and a fly-back lever for resetting. Supplied by JaincoLab.

Note: Mechanical stop clock with start-stop and fly-back levers.

View Details
Student Binoculars

Student Binoculars

Product Code : JA-LS-4961

Student Binoculars (SKU JA-LS-4961): lightweight, rubber-covered binoculars in 8x or 10x magnification, waterproof, fog proof and nitrogen purged, with optical glass lenses. Supplied by JaincoLab.

Note: Lightweight student binoculars, 8x or 10x, rubber covered.

View Details
Glass Syringe

Glass Syringe

Product Code : JA-LS-4962

Glass Syringe (SKU JA-LS-4962): multi-fit interchangeable glass syringes in 1, 2, 5, 10, 20, 30, 50 and 100 ml capacities, supplied in non-sterile condition. Supplied by JaincoLab.

Note: Interchangeable glass syringes, 1 to 100 ml, supplied non-sterile.

View Details
T.S Leaf Model

T.S Leaf Model

Product Code : JA-LS-4964

T.S Leaf Model (SKU JA-LS-4964): clearly printed, numbered diagram of a leaf in transverse section, mounted on a cardboard base with a label key in the right-hand corner; for learning the parts of a leaf. Supplied by JaincoLab.

Note: Mounted, labelled diagram of a leaf in transverse section with key.

View Details
TDS Meter Bench Top

TDS Meter Bench Top

Product Code : JA-LS-4965

TDS Meter Bench Top (SKU JA-LS-4965): 3½ digit LCD meter for conductivity, TDS and salinity; ranges 0-2000 ppm and 0-20 ppt, platinum dip cell, 1000 Hz, ±1% FS, 9 V battery; 85 x 28 x 165 mm. Supplied by JaincoLab.

Note: Battery-powered TDS/conductivity meter with 0-2000 ppm and 0-20 ppt ranges.

View Details
Telephone Trainer

Telephone Trainer

Product Code : JA-LS-4966

Telephone Trainer (SKU JA-LS-4966): demonstration model of a telephone showing its internal structure and how electric currents carry voice between two points; supplied complete with the components for the demonstration.

Note: Telephone trainer showing the internal structure and working principle of a telephone.

View Details
Solar System Model

Solar System Model

Product Code : JA-LS-4967

Solar System Model (SKU JA-LS-4967): tellurium model showing the orbits of the Earth and Moon and the Earth turning on its tilted axis; demonstrates seasons, changing day length, eclipses and the phases of the Moon.

Note: Tellurium model for seasons, day length, eclipses and phases of the Moon.

View Details
Terrestrial Telescope

Terrestrial Telescope

Product Code : JA-LS-4968

Terrestrial Telescope (SKU JA-LS-4968): model showing the principle of the terrestrial telescope, fitted with three convex lenses used as objective, inverting (erecting) lens and eyepiece.

Note: Terrestrial telescope model with three convex lenses.

View Details
Test Tube Borosilicate Glass

Test Tube Borosilicate Glass

Product Code : JA-LS-4969

Test Tube Borosilicate Glass (SKU JA-LS-4969): borosilicate glass test tubes in a range of capacities for holding, mixing and heating small quantities of solutions in chemistry laboratories.

Note: Borosilicate glass test tubes in several capacities.

View Details
Test Tube Holder (Wire Type)

Test Tube Holder (Wire Type)

Product Code : JA-LS-4972

Test Tube Holder (Wire Type) (SKU JA-LS-4972): plated steel wire test tube holder with finger grip and wire collar, aligned to grip the tube firmly.

Note: Plated steel wire test tube holder with finger grip.

View Details
Test Tube Holder (Wooden)

Test Tube Holder (Wooden)

Product Code : JA-LS-4973

Test Tube Holder (Wooden) (SKU JA-LS-4973): well-finished wooden peg-type test tube holder with spring closing action from a metal wire spring.

Note: Wooden peg-type test tube holder with spring-wire closing action.

View Details
Test Tube With Screw Cap

Test Tube With Screw Cap

Product Code : JA-LS-4974

Test Tube With Screw Cap (SKU JA-LS-4974): chemical-resistant glass test tube with a screw cap that closes tightly and opens easily, for storing chemicals and samples without spillage.

Note: Glass test tube with screw cap for spill-free storage of chemicals.

View Details
Third Hand Magnifier

Third Hand Magnifier

Product Code : JA-LS-4975

Third Hand Magnifier (SKU JA-LS-4975): bench magnifier with arms that hold the component, leaving both hands free for fine soldering, assembly and inspection work. Supplied by JaincoLab.

Note: Third hand magnifier that holds the work so both hands are free.

View Details
Three Pin Top

Three Pin Top

Product Code : JA-LS-4977

Three Pin Top (SKU JA-LS-4977): three-pin plug top for connecting laboratory and electrical equipment to mains sockets, made to fit so equipment can be plugged in easily. Supplied by JaincoLab.

Note: Three-pin plug top for connecting electrical equipment.

View Details
Micropipette Tips

Micropipette Tips

Product Code : JA-LS-4979

Micropipette Tips (SKU JA-LS-4979): tips for laboratory micropipettes, made with a precise finish; volume sizes and packing are confirmed on the quotation. Supplied by JaincoLab.

Note: Tips for laboratory micropipettes; sizes confirmed on the quotation.

View Details
Wrench Tool Set

Wrench Tool Set

Product Code : JA-LS-4980

Wrench Tool Set (SKU JA-LS-4980): complete set of metal wrenches in assorted sizes for tightening and loosening nuts and bolts on laboratory equipment and workshop assemblies. Supplied by JaincoLab.

Note: Complete metal wrench set in assorted sizes.

View Details
Transilluminator

Transilluminator

Product Code : JA-LS-4981

Transilluminator (SKU JA-LS-4981): transilluminator for viewing DNA and RNA separated by agarose gel electrophoresis in molecular biology laboratories; light source and viewing area confirmed on the quotation. Supplied by JaincoLab.

Note: Transilluminator for viewing DNA and RNA bands in agarose gels.

View Details
Plastic Box

Plastic Box

Product Code : JA-LS-4982

Plastic Box (SKU JA-LS-4982): clear plastic storage box with bottom-locking lid for samples, wires, screws, tips and small tools; available in different sizes. Supplied by JaincoLab.

Note: Clear plastic storage box with locking lid, in several sizes.

View Details
Tuning Forks Set

Tuning Forks Set

Product Code : JA-LS-4984

Tuning Forks Set (SKU JA-LS-4984): set of eight aluminium alloy tuning forks, each engraved with note and frequency: 256 Hz C, 288 D, 320 E, 341.3 F, 384 G, 426.6 A, 480 B and 512 Hz C.

Note: Set of eight aluminium alloy tuning forks, 256 Hz to 512 Hz.

View Details
Turbidity Meter

Turbidity Meter

Product Code : JA-LS-4985

Turbidity Meter (SKU JA-LS-4985): instrument for measuring turbidity, the cloudiness of a liquid caused by fine suspended particles, for ultra-clean and high-turbidity water; range and units confirmed on the quotation. Supplied by JaincoLab.

Note: Turbidity meter for ultra-clean and high-turbidity water.

View Details
Vacuum Flask

Vacuum Flask

Product Code : JA-LS-4987

Vacuum Flask (SKU JA-LS-4987): insulated vacuum flask that holds stored liquids near the temperature at which they were poured in, keeping hot substances hot and cold ones cold for long periods. Supplied by JaincoLab.

Note: Vacuum flask for keeping liquids hot or cold.

View Details
Water Turbine Model

Water Turbine Model

Product Code : JA-LS-4989

Water Turbine Model (SKU JA-LS-4989): demonstration model of a water turbine showing how a rotary machine converts the kinetic and potential energy of water into mechanical work. Supplied by JaincoLab.

Note: Water turbine demonstration model.

View Details
Water Turbine Model (With Dynamo)

Water Turbine Model (With Dynamo)

Product Code : JA-LS-4990

Water Turbine Model (With Dynamo) (SKU JA-LS-4990): water turbine demonstration model fitted with a dynamo, showing how the energy of water is converted into mechanical work and then into electricity. Supplied by JaincoLab.

Note: Water turbine model with dynamo.

View Details
Slotted Weight Hook

Slotted Weight Hook

Product Code : JA-LS-4991

Slotted Weight Hook (SKU JA-LS-4991): steel hanger rod with hook for carrying slotted weights together, so the weights are not misplaced and can be hung and carried at once.

Note: Steel hook rod for carrying slotted weights.

View Details
Wheel and Axle

Wheel and Axle

Product Code : JA-LS-4992

Wheel and Axle (SKU JA-LS-4992): simple machine apparatus with two wooden wheels of 150 mm and 75 mm diameter on a metal stand, for the conditions of equilibrium of loads hung from the wheels. Supplied by JaincoLab.

Note: Wheel and axle apparatus with 150 mm and 75 mm wooden wheels.

View Details
Windmill Model

Windmill Model

Product Code : JA-LS-4993

Windmill Model (SKU JA-LS-4993): working model that explains how electricity is generated from wind power, with the generated electricity lighting a bulb.

Note: Windmill model demonstrating electricity generation from wind.

View Details
Wire Gauge

Wire Gauge

Product Code : JA-LS-4994

Wire Gauge (SKU JA-LS-4994): wire gauze, a thin metal sheet with wire mesh, placed on the ring of a ring stand between the Bunsen burner and beakers or flasks to support them while heating.

Note: Wire gauze for supporting glassware over a Bunsen burner.

View Details
Wooden Cork Stoppers

Wooden Cork Stoppers

Product Code : JA-LS-4995

Wooden Cork Stoppers (SKU JA-LS-4995): cork stoppers in different sizes for closing test tubes, narrow-mouth bottles and flasks in the laboratory. Supplied by JaincoLab.

Note: Cork stoppers in different sizes for test tubes and bottles.

View Details
Wooden Hammer

Wooden Hammer

Product Code : JA-LS-4996

Wooden Hammer (SKU JA-LS-4996): well-finished all-wood hammer (mallet) for work that needs softer strokes than an iron hammer; packed in a cardboard or wooden box. Supplied by JaincoLab.

Note: All-wood mallet for soft strokes, boxed.

View Details
Woulff Bottle

Woulff Bottle

Product Code : JA-LS-4997

Woulff Bottle (SKU JA-LS-4997): safety trap connected between the suction flask and the vacuum source so that filtrate cannot overflow into an electric vacuum pump.

Note: Woulff bottle used as a vacuum-line trap to protect electric vacuum pumps.

View Details
Youngs Modulus Apparatus

Youngs Modulus Apparatus

Product Code : JA-LS-4998

Youngs Modulus Apparatus (SKU JA-LS-4998): scale plate with 0 to 30 mm scale and movable vernier reading to 0.1 mm, ceiling clamp with wood screws, and bars with clamping screws and hooks for the tension weight and loading masses.

Note: Wire-type Young's modulus apparatus with 0-30 mm scale and 0.1 mm vernier.

View Details
Zinc Plate

Zinc Plate

Product Code : JA-LS-4999

Zinc Plate (SKU JA-LS-4999): zinc plates for laboratory applications and electroplating, securely packed in cardboard boxes. Supplied by JaincoLab.

Note: Zinc plates for laboratory work and electroplating.

View Details

Chart Cabinet

Product Code : JA-LS-5000

Chart Cabinet (SKU JA-LS-5000): holds 100 charts rolled in hanging position on 10 hangers with 10 hooks each, sliding on wooden channels; hinged lockable door; MDF frame with laminated sheet; spirit polish finish.

Note: Chart cabinet for 100 rolled charts on 10 sliding hangers, with lockable door.

View Details
Literature Cabinet

Literature Cabinet

Product Code : JA-LS-5001

Literature Cabinet (SKU JA-LS-5001): plyboard cabinet finished with laminated sheet, hinged door with lock, listed with 24, 30 or 36 reprint boxes for storing papers and reprints.

Note: Lockable literature cabinet with 24, 30 or 36 reprint boxes.

View Details
Reference Card Cabinet

Reference Card Cabinet

Product Code : JA-LS-5002

Reference Card Cabinet (SKU JA-LS-5002): card drawers with steel rod and screw-fixed metal plate, knob and index card holder, restraining lever; MDF drawer frame with laminated front; stand with castor wheels listed.

Note: Reference card cabinet with rod-and-plate card drawers and restraining lever.

View Details
Reprint Boxes

Reprint Boxes

Product Code : JA-LS-5003

Reprint Boxes (SKU JA-LS-5003): boxes for keeping reprints, with kail wood frame and plywood bottom, a clamp inside, an index card holder and clips outside, and a spirit polish finish.

Note: Kail wood reprint boxes with inner clamp and outer card holder.

View Details

Tracer

Product Code : JA-LS-5004

Tracer (SKU JA-LS-5004): tracing box with a hinged thick-glass top in a wooden frame and a tube light inside; MDF frame with plywood bottom finished with laminated sheet; inside painted white. Supplied by JaincoLab.

Note: Glass-top tracing light box with tube light.

View Details
Wax Block Cabinet

Wax Block Cabinet

Product Code : JA-LS-5005

Wax Block Cabinet (SKU JA-LS-5005): stores 2000 blocks in drawers of 9 compartments (10 x 7.5 x 5 cm) with knob and index card holder; thick board clad in mica lamination; velvet-lined hinged door with lock and key.

Note: Lockable cabinet storing 2000 wax blocks in 9-compartment drawers.

View Details
Regulated Variable (Power Supply)

Regulated Variable (Power Supply)

Product Code : JA-LS-5006

Regulated Variable Power Supply (SKU JA-LS-5006): regulated output variable from 0 to 30 V at 1 A, separate digital panel meters for voltage, and protection against short circuit.

Note: Regulated variable power supply, 0-30 V / 1 A, short-circuit protected.

View Details
Mild Steel Retort Clamps

Mild Steel Retort Clamps

Product Code : JA-LS-5009

Mild Steel Retort Clamps (SKU JA-LS-5009): mild steel clamps for holding flasks, test tubes and other glassware on the rod of a retort stand in school and college laboratories.

Note: Mild steel retort clamps for retort stands.

View Details
Aluminium Retort Clamp

Aluminium Retort Clamp

Product Code : JA-LS-5010

Aluminium Retort Clamp (SKU JA-LS-5010): aluminium alloy clamp, white powder coated, with mild steel rod, gripping 15 mm to 25 mm diameters, for holding burettes.

Note: Powder-coated aluminium alloy burette clamp, 15-25 mm grip.

View Details
Universal Brass Clamp

Universal Brass Clamp

Product Code : JA-LS-5011

Universal Brass Clamp (SKU JA-LS-5011): aluminium body moulded with mild steel, chrome-plated rod (9 in x 7.7 mm standard; 7, 8 and 12 in available), chrome-plated brass double screw, cork-covered triangular jaws.

Note: Universal clamp with brass double screw, cork-covered jaws and chrome-plated rod.

View Details
Aluminium Universal Clamp

Aluminium Universal Clamp

Product Code : JA-LS-5012

Aluminium Universal Clamp (SKU JA-LS-5012): two-pronged clamp with spring-controlled curved jaws lined with cork, made from sheet metal and enamel painted.

Note: Two-pronged universal clamp with spring-controlled cork-lined jaws.

View Details
Brass Condenser Clamp

Brass Condenser Clamp

Product Code : JA-LS-5013

Brass Condenser Clamp (SKU JA-LS-5013): die-cast brass clamp, chrome plated, with mild steel rod, gripping round glassware of 50 mm to 65 mm diameter.

Note: Chrome-plated die-cast brass condenser clamp, 50-65 mm grip.

View Details
Aluminium Condenser Clamp

Aluminium Condenser Clamp

Product Code : JA-LS-5014

Aluminium Condenser Clamp (SKU JA-LS-5014): large four-prong clamp of powder-coated aluminium with steel rod, holding items up to 125 mm across.

Note: Large four-prong aluminium condenser clamp, up to 125 mm.

View Details
Brass Coaxial Clamp

Brass Coaxial Clamp

Product Code : JA-LS-5015

Brass Coaxial Clamp (SKU JA-LS-5015): spring-controlled moulded jaws adjusted by a coaxial brass nut, holds up to 75 mm; epoxy-coated alloy jaws, asbestos sleeved or rubber covered; chrome-plated brass casting; 12 in x 3/8 in rod.

Note: Spring-controlled coaxial clamp with brass nut, up to 75 mm.

View Details
Aluminium Coaxial Clamp

Aluminium Coaxial Clamp

Product Code : JA-LS-5016

Aluminium Coaxial Clamp (SKU JA-LS-5016): die-cast aluminium clamp, powder coated, on a chrome-plated steel rod, with centre screw mechanism gripping 50 mm to 65 mm diameters.

Note: Die-cast aluminium coaxial clamp with centre screw, 50-65 mm grip.

View Details
Iron Boss Head

Iron Boss Head

Product Code : JA-LS-5017

Iron Boss Head (SKU JA-LS-5017): cast iron boss head for retort stand and condenser clamp, powder coated, strong screws holding up to 25 mm; round screw, thumb screw or rod screw type.

Note: Cast iron boss head, up to 25 mm, three screw types.

View Details
Brass Boss Head

Brass Boss Head

Product Code : JA-LS-5020

Brass Boss Head (SKU JA-LS-5020): all-metal boss head accepting rods up to 3/4 in diameter, with a centre that adjusts to angles other than perpendicular. Supplied by JaincoLab.

Note: All-metal boss head for rods up to 3/4 in, adjustable angle.

View Details
Aluminium and Zinc Boss Head

Aluminium and Zinc Boss Head

Product Code : JA-LS-5021

Aluminium and Zinc Boss Head (SKU JA-LS-5021): powder-coated boss head holding rods up to 16 mm, for joining clamp rods to retort stand rods.

Note: Powder-coated aluminium and zinc boss head, up to 16 mm.

View Details
Mild Steel Boss Head

Mild Steel Boss Head

Product Code : JA-LS-5022

Mild Steel Boss Head (SKU JA-LS-5022): boss head of mild steel strip with screw, powder coated, holding rods up to 16 mm.

Note: Powder-coated mild steel strip boss head, up to 16 mm.

View Details
Iron Teclu Burner

Iron Teclu Burner

Product Code : JA-LS-5026

Iron Teclu Burner (SKU JA-LS-5026): red-painted cast iron base, chrome-plated brass tube 13 mm OD, screwed air regulator, 9 mm OD inlet, no stopcock, 18 cm high, for liquid propane gas.

Note: Cast iron Teclu burner for liquid propane gas, 18 cm high.

View Details
Brass Cork Borer

Brass Cork Borer

Product Code : JA-LS-5028

Brass Cork Borer (SKU JA-LS-5028): cork borer made from thick brass pipe with a strong handle, euro design, for cutting holes in stoppers to take glass tubing.

Note: Thick brass cork borer with strong handle.

View Details
Spirit Burner

Spirit Burner

Product Code : JA-LS-5029

Spirit Burner (SKU JA-LS-5029): spirit burner for laboratory heating, listed in stainless steel and brass.

Note: Laboratory spirit burner, stainless steel and brass.

View Details
Iron A Stand

Iron A Stand

Product Code : JA-LS-5030

Iron A Stand (SKU JA-LS-5030): retort stand with A-shaped base (listed as mild steel and cast iron), hammer-tone painted, 600 mm rod height, 12 mm rod diameter.

Note: A-base retort stand with 600 mm x 12 mm rod.

View Details
Cylinder Metals

Cylinder Metals

Product Code : JA-LS-5031

Cylinder Metals (SKU JA-LS-5031): set of 6 metal cylinders in stainless steel, zinc, aluminium, brass, copper and iron, for comparing the properties of metals.

Note: Set of 6 cylinders in different metals.

View Details
Cube Materials

Cube Materials

Product Code : JA-LS-5032

Cube Materials (SKU JA-LS-5032): set of 8 cubes in stainless steel, zinc, aluminium, brass, copper, iron, wood and plastic, for comparing the properties of materials.

Note: Set of 8 cubes in metals, wood and plastic.

View Details
Retort Rod

Retort Rod

Product Code : JA-LS-5033

Retort Rod (SKU JA-LS-5033): rod for retort stands and clamp assemblies in iron, chrome-plated iron or stainless steel; sizes listed 50, 75, 100, 125 and 150 mm.

Note: Retort rod in iron, chrome-plated iron or stainless steel, five sizes.

View Details
Aluminium Boss Head

Aluminium Boss Head

Product Code : JA-LS-5035

Aluminium Boss Head (SKU JA-LS-5035): square-type aluminium boss head holding rods up to 16 mm, for use with retort stands.

Note: Square aluminium boss head for rods up to 16 mm.

View Details
Double Spatula

Double Spatula

Product Code : JA-LS-5037

Double Spatula (SKU JA-LS-5037): double-ended stainless steel laboratory spatula, one end flat and the other shaped, for handling powders and crystals.

Note: Double-ended stainless steel spatula.

View Details
SS Micro Spatula with Handle

SS Micro Spatula with Handle

Product Code : JA-LS-5038

SS Micro Spatula with Handle (SKU JA-LS-5038): small stainless steel spatula with a Bakelite handle or a blue or red PVC handle, for transferring small amounts of powders.

Note: Stainless steel micro spatula with Bakelite or PVC handle.

View Details
Stainless Steel Flask

Stainless Steel Flask

Product Code : JA-LS-5040

Stainless Steel Flask (SKU JA-LS-5040): laboratory flask made of stainless steel, listed size 300 mm.

Note: Stainless steel flask, listed size 300 mm.

View Details
Brass Ring and Ball

Brass Ring and Ball

Product Code : JA-LS-5041

Brass Ring and Ball (SKU JA-LS-5041): brass ball and brass ring, each on a handle; the ball passes through the ring cold but not after heating, demonstrating thermal expansion.

Note: Brass ring and ball apparatus for thermal expansion.

View Details
SS Pan Tip Spatula

SS Pan Tip Spatula

Product Code : JA-LS-5043

SS Pan Tip Spatula (SKU JA-LS-5043): stainless steel spatula with a pan-shaped tip; the listing names medical throat examination as its use. Offered for teaching, training and laboratory use.

Note: Stainless steel pan tip spatula.

View Details
Brass Hoff Man Screw Clip

Brass Hoff Man Screw Clip

Product Code : JA-LS-5044

Brass Hoff Man Screw Clip (SKU JA-LS-5044): chrome-plated brass screw clip that holds onto rubber tubing to control or stop flow.

Note: Chrome-plated brass Hofmann screw clip for rubber tubing.

View Details
Brass Pendulum Bobs

Brass Pendulum Bobs

Product Code : JA-LS-5045

Brass Pendulum Bobs (SKU JA-LS-5045): brass bobs with a small hook for suspension, for simple pendulum experiments.

Note: Brass pendulum bobs with suspension hook.

View Details
Brass Filter Pump Edward Type

Brass Filter Pump Edward Type

Product Code : JA-LS-5046

Brass Filter Pump Edward Type (SKU JA-LS-5046): chrome-plated brass filter pump, listed as heavy duty, for providing suction in laboratory filtration.

Note: Chrome-plated brass filter pump, Edward type.

View Details
Zinc Boss Head

Zinc Boss Head

Product Code : JA-LS-5047

Zinc Boss Head (SKU JA-LS-5047): boss head precision die-cast in zinc-based alloy for joining clamp rods to retort stands; alloy softens at 250 °C and melts at 400 °C.

Note: Die-cast zinc alloy boss head; softens at 250 °C.

View Details
SS Ointment Spatula

SS Ointment Spatula

Product Code : JA-LS-5049

SS Ointment Spatula (SKU JA-LS-5049): stainless steel spatula with a flexible blade for mixing and spreading ointments in pharmaceutics practicals.

Note: Flexible stainless steel ointment spatula.

View Details
Trulla Spatula Type

Trulla Spatula Type

Product Code : JA-LS-5050

Trulla Spatula Type (SKU JA-LS-5050): trulla pattern (trowel-shaped) laboratory spatula in stainless steel, 175 mm long.

Note: Trulla pattern stainless steel spatula, 175 mm.

View Details
Wooden Stand

Wooden Stand

Product Code : JA-LS-5052

Wooden Stand (SKU JA-LS-5052): laboratory stand made of red wood, listed in small and large sizes.

Note: Red wood laboratory stand, small and large sizes.

View Details
Round Magnetic Stirring Bar

Round Magnetic Stirring Bar

Product Code : JA-LS-5053

Round Magnetic Stirring Bar (SKU JA-LS-5053): round PTFE stirring bar with Alnico V magnet and pivot ring, for use on magnetic stirrers.

Note: Round PTFE stirring bar with pivot ring and Alnico V magnet.

View Details
Triangular Magnetic Stirring Bar

Triangular Magnetic Stirring Bar

Product Code : JA-LS-5054

Triangular Magnetic Stirring Bar (SKU JA-LS-5054): triangular PTFE stirring bar with Alnico V magnet, for dissolving solids and mixing liquids with sediments.

Note: Triangular PTFE stirring bar with Alnico V magnet.

View Details
Dumb Bell Magnetic Stirring Bar

Dumb Bell Magnetic Stirring Bar

Product Code : JA-LS-5055

Dumb Bell Magnetic Stirring Bar (SKU JA-LS-5055): dumb-bell shaped PTFE stirring bar with Alnico V magnet, for highly viscous mixtures and round-bottom containers.

Note: Dumb-bell PTFE stirring bar for viscous mixtures and round-bottom vessels.

View Details

Trapezoidal Magnetic Stirring Bar

Product Code : JA-LS-5056

Trapezoidal Magnetic Stirring Bar (SKU JA-LS-5056): trapezoidal PTFE stirring bar with a high-energy rare earth magnet, giving higher torque than a conventional stirring bar.

Note: Trapezoidal PTFE stirring bar with rare earth magnet.

View Details

Spin Wings

Product Code : JA-LS-5057

Spin Wings (SKU JA-LS-5057): PTFE stirring bars with Alnico V magnet for stirring in small conical and round centrifuge tubes and test tubes; one set has 2 of each size.

Note: Spin wing stirring bars for small tubes, 2 of each size per set.

View Details
Simple H Type Potometer

Simple H Type Potometer

Product Code : JA-LS-5060

Simple H Type Potometer (SKU JA-LS-5060): compact H-type potometer of die-moulded plastic with a 140 mm capillary tube, for measuring water uptake by a leafy shoot.

Note: Compact die-moulded plastic H-type potometer with 140 mm capillary tube.

View Details
Cross Spin Magnetic Stirring Bar

Cross Spin Magnetic Stirring Bar

Product Code : JA-LS-5061

Cross Spin Magnetic Stirring Bar (SKU JA-LS-5061): cross-shaped PTFE stirring bar with Alnico V magnet; one set has one bar of each size.

Note: Cross-shaped PTFE stirring bars, one of each size per set.

View Details
Variable Volume Micropipette

Variable Volume Micropipette

Product Code : JA-LS-5064

Variable Volume Micropipette (SKU JA-LS-5064): adjustable-volume micropipette, light and ergonomic, one-hand operation, large-number display with small increments, autoclavable at 121 °C without disassembly. Supplied by JaincoLab.

Note: Adjustable-volume micropipette, autoclavable at 121 °C.

View Details
Laboratory Helmet

Laboratory Helmet

Product Code : JA-LS-5065

Laboratory Helmet (SKU JA-LS-5065): helmet with foam protection and inner rim, adjustable chin strap, 6-point suspension cradle with slip-fit adjustment, head size 53 to 61 cm. Supplied by JaincoLab.

Note: Laboratory helmet, 6-point suspension, 53 to 61 cm.

View Details
Acrylic Test Tube Stand

Acrylic Test Tube Stand

Product Code : JA-LS-5066

Acrylic Test Tube Stand (SKU JA-LS-5066): plastic test tube stand for the chemical laboratory, available in different colours.

Note: Plastic (acrylic) test tube stand in different colours.

View Details
Silica Crucible

Silica Crucible

Product Code : JA-LS-5067

Silica Crucible (SKU JA-LS-5067): low-form crucible with lid, glazed inside and outside, in 15, 25, 50, 80, 100, 150 and 200 ml capacities, for heating at very high temperatures.

Note: Low-form silica crucible with lid, 15 to 200 ml.

View Details
Porcelain Gooch Crucible

Porcelain Gooch Crucible

Product Code : JA-LS-5068

Porcelain Gooch Crucible (SKU JA-LS-5068): filtering crucible with perforated bottom for use up to 800 °C, glazed inside and outside except the outside bottom surface, supplied without lid.

Note: Porcelain Gooch crucible with perforated bottom, up to 800 °C.

View Details
Evaporating Dishes (Porcelain)

Evaporating Dishes (Porcelain)

Product Code : JA-LS-5069

Evaporating Dishes (Porcelain) (SKU JA-LS-5069): porcelain evaporating dish, 85 mm diameter, 34 mm high, 75 ml capacity, thermally stable and glazed inside, for evaporating solutions to leave the solute.

Note: Porcelain evaporating dish, 85 mm x 34 mm, 75 ml.

View Details
Agate Pestle and Mortar

Agate Pestle and Mortar

Product Code : JA-LS-5070

Agate Pestle and Mortar (SKU JA-LS-5070): hand-crafted from translucent blue-grey natural agate with a polished surface; resists acids (except HF) and solvents; for grinding samples for IR and XRF analysis. Supplied by JaincoLab.

Note: Natural agate mortar and pestle, polished, resists acids except HF.

View Details
Wooden Test Tube Stand

Wooden Test Tube Stand

Product Code : JA-LS-5072

Wooden Test Tube Stand (SKU JA-LS-5072): polished wooden stand with six holes - the first and last 25 mm, the middle four 18 mm - and four plastic levelling feet.

Note: Polished wooden test tube stand, 6 holes, 4 plastic feet.

View Details
Polygon Magnetic Stirring Bar

Polygon Magnetic Stirring Bar

Product Code : JA-LS-5073

Polygon Magnetic Stirring Bar (SKU JA-LS-5073): polygon-shaped stirring bar of PTFE with an Alnico V magnet, for mixing liquids on a magnetic stirrer.

Note: Polygon PTFE stirring bar with Alnico V magnet.

View Details
Magnetic Retriever

Magnetic Retriever

Product Code : JA-LS-5074

Magnetic Retriever (SKU JA-LS-5074): PTFE-covered Alnico V magnet for lifting a magnetic stirring bar out of a solution after mixing; hanging loop at one end for storage.

Note: PTFE magnetic retriever for stirring bars, with hanging loop.

View Details
Dropper Teats

Dropper Teats

Product Code : JA-LS-5076

Dropper Teats (SKU JA-LS-5076): teats that fit on glass droppers and dropping pipettes to draw up and dispense liquid drop by drop. Material and sizes are confirmed on the quotation. Supplied by JaincoLab.

Note: Dropper teats; material and sizes confirmed on the quotation.

View Details
Lens Box

Lens Box

Product Code : JA-LS-5077

Lens Box (SKU JA-LS-5077): wooden box for storing a set of six lenses.

Note: Wooden box for a set of six lenses.

View Details
Prism Laboratory

Prism Laboratory

Product Code : JA-LS-5078

Prism Laboratory (SKU JA-LS-5078): triangular glass prism for laboratory optics work such as refraction and dispersion of light. Supplied by JaincoLab.

Note: Triangular glass prism for the laboratory.

View Details
Glass Beads

Glass Beads

Product Code : JA-LS-5079

Glass Beads (SKU JA-LS-5079): small glass beads for laboratory use, such as smooth boiling of liquids. Bead size, glass type and pack quantity are confirmed on the quotation. Supplied by JaincoLab.

Note: Laboratory glass beads; size and pack confirmed on the quotation.

View Details
Magnifiers

Magnifiers

Product Code : JA-LS-5081

Magnifiers (SKU JA-LS-5081): handheld magnifying glass with a 4 inch convex lens giving 4X magnification, mounted in a frame with a handle; other sizes and focal lengths are listed as available.

Note: Handheld 4X magnifier, 4 inch lens, frame with handle.

View Details
Roll Litmus Paper

Roll Litmus Paper

Product Code : JA-LS-5083

Roll Litmus Paper (SKU JA-LS-5083): red litmus paper x 100 strips and blue litmus paper x 100 strips, in resealable vials with 5 booklets in each vial, for acid-base testing. Supplied by JaincoLab.

Note: Red and blue litmus paper, 100 strips each, resealable vials.

View Details
Tuning Fork Set

Tuning Fork Set

Product Code : JA-LS-5085

Tuning Fork Set (SKU JA-LS-5085): set of four tuning forks - fork-shaped acoustic resonators that each give a fixed tone - for sound experiments in the physics laboratory.

Note: Set of four tuning forks.

View Details
Respirometer

Respirometer

Product Code : JA-LS-5086

Respirometer (SKU JA-LS-5086): two stoppered glass boiling tubes linked by three-way taps to a graduated U-tube manometer, with wire basket and 1 mL syringe, for comparing gas exchange by small organisms during respiration.

Note: Respirometer with graduated U-manometer, control thermo-barometer tube, wire basket and 1 mL syringe.

View Details
Glass Manometer Tube Mounted

Glass Manometer Tube Mounted

Product Code : JA-LS-5087

Glass Manometer Tube Mounted (SKU JA-LS-5087): glass manometer tube supplied mounted, for measuring pressure differences from the difference in liquid levels. Length, scale and mounting are confirmed on the quotation.

Note: Mounted glass manometer tube; dimensions confirmed on the quotation.

View Details
Microburette

Microburette

Product Code : JA-LS-5089

Microburette (SKU JA-LS-5089): borosilicate glass burette with a single-bore Rotaflo stopcock, listed capacity 50 x 0.1 ml; each burette is individually calibrated, as listed.

Note: Borosilicate glass burette, single-bore Rotaflo stopcock, 50 x 0.1 ml.

View Details
Diffusion Tube

Diffusion Tube

Product Code : JA-LS-5090

Diffusion Tube (SKU JA-LS-5090): tube for a bromine diffusion kit, used to demonstrate the diffusion of a gas. Dimensions are confirmed on the quotation. Supplied by JaincoLab.

Note: Diffusion tube for a bromine diffusion kit.

View Details

Spare Glass Bulb

Product Code : JA-LS-5092

Spare Glass Bulb (SKU JA-LS-5092): replacement glass bulb for a Hero's engine, the steam reaction-turbine demonstration.

Note: Replacement glass bulb for a Hero's engine.

View Details
Fixed Volume Micropipette

Fixed Volume Micropipette

Product Code : JA-LS-5094

Fixed Volume Micropipette (SKU JA-LS-5094): fixed-volume micropipette offered in 32 volumes from 2 to 1000 microlitres; two-stage plunger, twist-eject tip removal, autoclavable, colour coded. Supplied by JaincoLab.

Note: Fixed-volume micropipette, 32 volumes from 2 to 1000 microlitres.

View Details
Laboratory Cap

Laboratory Cap

Product Code : JA-LS-5096

Laboratory Cap (SKU JA-LS-5096): disposable cap for laboratory wear; the listing gives the material as "filt", so material and pack size are confirmed on the quotation. Supplied by JaincoLab.

Note: Disposable laboratory cap.

View Details
Porcelain Wire Gauge

Porcelain Wire Gauge

Product Code : JA-LS-5097

Porcelain Wire Gauge (SKU JA-LS-5097): square wire gauze of galvanised iron (G.I.) wire with an asbestos centre, extra stout quality, placed between a burner and glassware to spread the heat.

Note: Square G.I. wire gauze with asbestos centre, extra stout.

View Details
Porcelain Buchner Funnel

Porcelain Buchner Funnel

Product Code : JA-LS-5098

Porcelain Buchner Funnel (SKU JA-LS-5098): porcelain funnel with a fixed perforated plate for suction filtration, glazed on inner and outer surfaces except the rim. Supplied by JaincoLab.

Note: Porcelain Buchner funnel with fixed perforated plate.

View Details
Porcelain Pestle and Mortar

Porcelain Pestle and Mortar

Product Code : JA-LS-5099

Porcelain Pestle and Mortar (SKU JA-LS-5099): porcelain mortar with pestle in 60, 75, 100, 125, 150 and 175 mm outside diameters; capacities from about 70 ml to 860 ml (approximate).

Note: Porcelain mortar and pestle, 60 to 175 mm.

View Details
Dissecting (Set of 14 Instruments)

Dissecting (Set of 14 Instruments)

Product Code : JA-LS-5100

Dissecting (Set of 14 Instruments) (SKU JA-LS-5100): stainless steel dissecting set - 2 scissors, 2 forceps, 4 needles, scalpel, B.P. handle with blade, razor, magnifying glass, chain and hook, blow pipe - in a zipper leather case.

Note: 14-piece stainless steel dissecting set in zipper leather case.

View Details
Wooden Slide Box

Wooden Slide Box

Product Code : JA-LS-5101

Wooden Slide Box (SKU JA-LS-5101): box of steamed beech wood for storing microscope slides; light in weight.

Note: Steamed beech wood slide box.

View Details
Spatula Knife (Wooden)

Spatula Knife (Wooden)

Product Code : JA-LS-5102

Spatula Knife (Wooden) (SKU JA-LS-5102): stainless steel spatula knife with a wooden handle; the listing describes it for spreading strip wax thinly, as the metal retains heat. Reusable and easy to clean. Supplied by JaincoLab.

Note: Stainless steel spatula knife with wooden handle.

View Details
Burette/ Funnel Wooden Stand

Burette/ Funnel Wooden Stand

Product Code : JA-LS-5103

Burette/ Funnel Wooden Stand (SKU JA-LS-5103): polished steamed beech hardwood stand, 52 cm high on a 20 x 10 x 2 cm base, with a cork-lined wooden clamp and plastic screws.

Note: Polished beech wood burette/funnel stand, 52 cm, cork-lined clamp.

View Details
Octagon Magnetic Stirring Bar

Octagon Magnetic Stirring Bar

Product Code : JA-LS-5104

Octagon Magnetic Stirring Bar (SKU JA-LS-5104): octagonal stirring bar moulded with a strong Alnico V magnet and coated with PTFE resin.

Note: Octagonal PTFE-coated stirring bar with Alnico V magnet.

View Details
Glass Bottle with Teat

Glass Bottle with Teat

Product Code : JA-LS-5106

Glass Bottle with Teat (SKU JA-LS-5106): reagent dropping bottle with a glass pipette in a rubber stopper with bulb; square or round, clear, amber or borosilicate glass; 30, 60 and 125 ml.

Note: Dropping bottle with glass pipette, rubber stopper and bulb, 30 to 125 ml.

View Details
Inoculating Loop Nichrome Wire

Inoculating Loop Nichrome Wire

Product Code : JA-LS-5107

Inoculating Loop Nichrome Wire (SKU JA-LS-5107): nichrome wire inoculating loop, listed size 2 mm, in calibrated 1 microlitre and 10 microlitre sizes and various non-calibrated sizes.

Note: Nichrome wire inoculating loop, calibrated and non-calibrated sizes.

View Details
Chloroform Below with Cotton Net

Chloroform Below with Cotton Net

Product Code : JA-LS-5108

Chloroform Below with Cotton Net (SKU JA-LS-5108): bellow covered with a cotton net, for use with automatic burettes.

Note: Cotton-net covered bellow for automatic burettes.

View Details
Laboratory Heat Sealer

Laboratory Heat Sealer

Product Code : JA-LS-5109

Laboratory Heat Sealer (SKU JA-LS-5109): pneumatic, microprocessor-based heat sealer with digital display, PID temperature control, separately heated jaws, sealing force 15-180 kg, dwell 0.0-9.9 s, sealing length 150, 300 or 500 mm.

Note: Pneumatic laboratory heat sealer, 15-180 kg force, dwell 0.0-9.9 s.

View Details
Bottle Neck Cutter

Bottle Neck Cutter

Product Code : JA-LS-5110

Bottle Neck Cutter (SKU JA-LS-5110): light, single-handed ratchet shears for cutting and trimming preforms and the necks of bottles, including large wall thicknesses; blue or black.

Note: Single-handed ratchet cutter for preforms and bottle necks.

View Details

Sealer Machine

Product Code : JA-LS-5111

Sealer Machine (SKU JA-LS-5111): hand sealing machine with epoxy powder-coated aluminium cast body, sealing transformer, dual timer for sealing and cooling, 310 mm maximum sealing length, spare heater bar assembly included, no cutter.

Note: Hand sealing machine, dual timer, 310 mm maximum sealing length.

View Details

Science Kit

    Scientific Instrument

    Educational Rock and Minerals

      Biology Equipment

      Soil Testing

        Rock Testing

          Best Lab Equipment

            Educational Lab Equipment

            Analytical Lab Instrument

            Laboratory Apparatus

            Laboratory Equipments Supplies

            Engineering Lab Equipment

            Maths Lab Equipment

            Porcelain Ware

            Hospital Lab Equipments

              Anatomical Models

              Vocational Training Laboratory Equipment

              Lab Glassware

              Electronics Lab Equipments

              Lab Plasticware

              Chemistry Lab Equipment

              Physics Lab Equipment

              Geography Lab Models

              Office Address

              Jain Scientific Suppliers
              2475-84, Hargolal Road,
              Ambala Cantt, Haryana, India

              [email protected]

              +91-85699-09696

              Quick Links

              Follow Us

              ©2026 JaincoLab . All Right Reserved

              JaincoLab has regular exports of Lab Glassware Manufacturer in India , Educational Scientific Instruments, School Laboratory Scientific Equipment , Biology Lab Equipment ,Physics Lab Equipment , Chemistry Lab Instruments , Laboratory Equipment , Biology Lab Equipment , School lab , Math Lab , Electronics Lab Trainer, Microscopes , Engineering Lab Equipment and Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System and Physiotherapy Equipment for Schools, Colleges, University & Research Labs. for the following countries: India, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma/ Myanmar, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Congo, Costa Rica, Cote d'Ivoire/Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakstan, Kenya (Nairobi), Kiribati, Korea, North, Korea, South, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Portugal, Qatar, Romania, Russia, Rwanda (Kigali), Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, United Arab Emirates (Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe