Single Cylinder Four Stroke Petrol Engine Test Rig
Product Code : JA-FMAHLE-7340
The Single Cylinder Four Stroke Petrol Engine Test Rig (SKU JA-FMAHLE-7340) is a complete teaching set-up for engine performance tests: the petrol engine drives a rope brake dynamometer for variable loading, and a separate panel measures fuel and air. JaincoLab builds this four stroke petrol engine test rig for IC engine laboratories in mechanical and automobile engineering colleges, polytechnics and ITIs, where students work out power, fuel consumption, efficiencies and air-fuel ratio.
Specifications
The rig combines a single cylinder four stroke petrol engine, a rope brake dynamometer for variable loading and a stand-alone panel with air box, fuel tank, manometer and fuel measuring unit, and it runs on a 230 ±10 V AC, 50 Hz single-phase supply with proper earthing.
| Product | Single Cylinder Four Stroke Petrol Engine Test Rig |
| SKU | JA-FMAHLE-7340 |
| Engine | Single cylinder, four stroke, petrol |
| Loading | Rope brake dynamometer for variable loading |
| Panel | Stand-alone independent panel with air box, fuel tank, manometer and fuel measuring unit |
| Electric supply | 230 ±10 V AC, 50 Hz, single phase with proper earthing (neutral-earth voltage below 5 V AC) |
| Fuel and oil needed | Petrol about 10 litres; lubricating oil about 1 litre (20W40) |
| Space required | 3300 (L) x 2900 (W) x 1700 (H) mm |
Applications of the four stroke petrol engine test rig
The four stroke petrol engine test rig is used for the standard engine performance test, in which students load the engine in steps and calculate power, fuel consumption, efficiencies and air-fuel ratio from the dynamometer, fuel and air readings.
- Study of engine performance: power output at different loads
- Fuel consumption and specific fuel consumption
- Engine efficiencies from the measured power and fuel consumption
- Air-fuel ratio from the air box and manometer readings
- IC engine practicals in automobile and mechanical engineering courses
Scope of supply and ordering
The listing covers the single cylinder four stroke petrol engine with rope brake dynamometer and the stand-alone panel with air box, fuel tank, manometer and fuel measuring unit. Petrol and lubricating oil are listed as utilities for the laboratory to arrange. Accessories, spares and quantities are confirmed on the quotation.
Minimum order quantity, lead time and packing are confirmed on each quotation for the number of rigs and the delivery destination. Single rigs and complete IC engine laboratories are supplied to colleges, ITIs and tender contractors.
Frequently asked questions
How is the engine loaded?
With a rope brake dynamometer that allows variable loading.
What does the panel include?
An air box, fuel tank, manometer and fuel measuring unit on a stand-alone independent panel.
What utilities are required?
A 230 ±10 V AC, 50 Hz single-phase supply with proper earthing, about 10 litres of petrol, about 1 litre of 20W40 oil and floor space of 3300 x 2900 mm.
Related products
- Single Cylinder Two Stroke Petrol Engine Test Rig
- Multi Cylinder Four Stroke Water Cooled Diesel Engine Test Rig
- Separating and Throttling Calorimeter
- Marcet Boiler
Engine, steam and fluid engineering set-ups are listed in the JaincoLab fluid mechanics lab equipment range.
Request a quote
To order the Four Stroke Petrol Engine Test Rig, send the quantity and delivery destination through the JaincoLab contact page or email [email protected]. For tender or project supply, see our tenders page.
