Electro Pneumatic Trainer
Product Code : JA-CTM-9063
The Electro Pneumatic Trainer (SKU JA-CTM-9063) is an electro pneumatic trainer that teaches the basics of pneumatic control systems and shows the design, construction and application of electro-pneumatic components and circuits. Students build circuits with single and double acting cylinders, 5/2 and 3/2 way solenoid valves, AND and OR logic valves, inductive proximity sensors and a relay module, wired through an MS powder coated control panel. JaincoLab manufactures it for fluid power and automation labs in colleges and polytechnics.
Specifications
The trainer uses 25 mm bore, 100 mm stroke foot-mounted cylinders, 1/4 in valves and fittings, an FRL unit rated 0-10 kg/cm2, 24 V DC indicators and relays, and 18 mm inductive proximity sensors with 5 mm sensing distance.
| Product | Electro Pneumatic Trainer |
| SKU | JA-CTM-9063 |
| Single acting cylinder | Bore 25 mm, stroke 100 mm, foot mounting |
| Double acting cylinder | Bore 25 mm, stroke 100 mm, foot mounting |
| FRL unit | 1/4 in connection, 0-10 kg/cm2 |
| Solenoid valves | 2 nos: 5/2 way, 1/4 in, 230 V AC / 24 V; 3/2 way, 1/4 in, 230 V AC / 24 V DC |
| Other valves | Flow control valve 1/4 in square body; non-return valve; AND (dual pressure) valve; OR (shuttle) valve |
| Manifold and fittings | Block manifold 1/4 in, 6 way; sintered silencer; male connectors; quick push-pull connectors for branching |
| Tubing | PU, 6 mm OD x 4 mm ID: 10 m transparent, 10 m blue |
| Sensors | Inductive 2-wire proximity sensors, 18 mm diameter, 5 mm sensing distance |
| Indicators and relays | 24 V DC indicating lamps; relay module 24 V DC, 2 NO/NC contacts, panel mounting |
| Pressure gauge | 0-7 kg/cm2, 1/2 in BSP, 100 mm dial |
| Pneumatic motor | Unidirectional, free speed 22,000 rpm, air pressure 0-90 psi |
| Control panel | MS powder coated, switches, indicators, test points, controller on front fascia; 2.5 terminal connectors on DIN rail; 1 sq mm wiring in 1 x 1 in PVC cable tray; 1 x 1 x 1 ft |
| Air compressor (optional) | 25 litre tank, 2 CFM, 2 HP 230 V AC motor, working pressure 5-6 kg/cm2 |
Experiments on the electro pneumatic trainer
The trainer covers pneumatic and electro-pneumatic control from single valves and cylinders up to relay-logic and sensor-based sequences.
- Study of pneumatic components, FRL unit and valve symbols
- Direct and indirect control of single and double acting cylinders
- AND and OR logic circuits with dual pressure and shuttle valves
- Solenoid valve control through relay board logic circuits
- Position sensing with inductive proximity sensors
- Speed control of cylinders and the pneumatic motor with flow control valves
Scope of supply and ordering
The listing covers the cylinders, valves, FRL unit, manifold, fittings, tubing, sensors, indicating lamps, relay module, pressure gauge, pneumatic motor, control panel with profile plate and training manuals with mimic charts. The air compressor is optional. Accessories, spares and quantities are confirmed on the quotation.
Minimum order quantity, lead time and packing are confirmed on each quotation for the number of trainers and whether the compressor is needed and the delivery destination. Single trainers and full pneumatics lab sets for colleges and tenders are supplied.
Frequently asked questions
Is an air compressor included?
No. A compressor with a 25 litre tank, 2 CFM and 2 HP motor is available as an option.
Which sensors are fitted?
Inductive 2-wire proximity sensors, 18 mm diameter, with 5 mm sensing distance.
What voltage do the solenoid valves use?
230 V AC or 24 V versions of the 5/2 and 3/2 way valves are listed; state the preferred coil voltage.
Related products
See the complete CNC and automation trainer range for hydraulic, pneumatic, PLC and CNC trainers from JaincoLab.
Request a quote
To order the Electro Pneumatic Trainer, send the quantity and delivery destination through the JaincoLab contact page or email [email protected], quoting SKU JA-CTM-9063.
Contractors bidding for education-ministry, World Bank or United Nations laboratory tenders can source the complete equipment list from JaincoLab. We manufacture and export for these projects, have delivered them successfully in many countries and specialise in turnkey laboratory supply.
