Base Module for Experiments
Product Code : JA-FMAHLE-9999
The Base Module for Experiments (SKU JA-FMAHLE-9999), supplied by JaincoLab, supplies water to fluid mechanics experiment units and measures their flow rate. It works on a closed circuit with a 180 litre storage tank, a submersible pump and a measuring tank divided in two, so large and small flows are timed with a stopwatch. This hydraulic base module also has a work surface with an integrated flume for weir experiments and a measuring beaker for very small flows.
Specifications
The base module is specified by a 250 W submersible pump with 150 L/min maximum flow and 7.6 m maximum head, a 180 litre storage tank, a measuring tank of 40 L and 10 L sections, a 2 L measuring beaker and a 530 x 150 x 180 mm flume.
| Product | Base Module for Experiments |
| SKU | JA-FMAHLE-9999 |
| Water circuit | Closed, with storage tank, submersible pump and measuring tank |
| Pump | Power consumption 250 W; max. flow 150 L/min; max. head 7.6 m |
| Storage tank | 180 L |
| Measuring tank | Divided: 40 L for large flows, 10 L for small flows |
| Measuring beaker | 2 L, with scale, for very small flows |
| Flume | 530 x 150 x 180 mm (L x W x H), integrated in the work surface |
| Flow measurement | Volumetric, with stopwatch |
Uses of the hydraulic base module
The base module is the common water supply and flow-measuring bench on which smaller fluid mechanics units are placed, such as Bernoulli, tank outflow and vortex experiments, and weirs in its own flume.
- Supplying water to fluid mechanics experiment units
- Volumetric flow measurement with measuring tank and stopwatch
- Weir experiments in the integrated flume
- Very small flow measurement with the measuring beaker
Scope of supply and ordering
The listing covers the Base Module for Experiments with storage tank, pump, measuring tank, flume, measuring beaker and stopwatch. Experiment units are ordered separately. Accessories, spares and quantities are confirmed on the quotation.
MOQ, lead time and packing are confirmed on each quotation for the quantity and the delivery destination. Single trainers and complete fluid mechanics laboratories for engineering colleges, polytechnics and TVET institutes, including tender orders, are supplied.
Frequently asked questions
What flow can the pump supply?
Up to 150 L/min at a maximum head of 7.6 m, from a 250 W submersible pump.
How is flow measured?
Volumetrically, with a measuring tank divided into 40 L and 10 L sections, a 2 L beaker and a stopwatch.
Can weirs be tested on it?
Yes. The work surface has an integrated flume of 530 x 150 x 180 mm.
Related products
See the complete fluid mechanics lab equipment range from JaincoLab for hydraulics, hydrostatics and flow measurement.
Request a quote
For a quotation on the Base Module for Experiments, send the quantity, any accessories needed and the delivery destination through the JaincoLab contact page or email [email protected] with SKU JA-FMAHLE-9999. Institutions and contractors buying under a tender can also reach us via the tenders page.
