Multi Cylinder Four Stroke Water Cooled Diesel Engine Test Rig
Product Code : JA-FMAHLE-7343
The Multi Cylinder Four Stroke Water Cooled Diesel Engine Test Rig (SKU JA-FMAHLE-7343) is an IC engine performance set-up with a dynamometer and arrangements for measuring fuel and intake air. JaincoLab builds this multi cylinder diesel engine test rig for IC engine and thermal engineering laboratories in mechanical and automobile engineering colleges and polytechnics, where students determine specific fuel consumption, brake horse power and the volumetric, mechanical and thermal efficiencies.
Specifications
The rig consists of a multi cylinder four stroke water cooled diesel engine, a dynamometer, fuel measuring and air intake measuring arrangements and related fittings; it needs a 220 V, 5 A single-phase supply, about 10 LPM of continuous water, 10 litres of fuel and a floor area of 3 x 2 m.
| Product | Multi Cylinder Four Stroke Water Cooled Diesel Engine Test Rig |
| SKU | JA-FMAHLE-7343 |
| Engine | Multi cylinder, four stroke, water cooled, diesel |
| Loading | Dynamometer |
| Measurement | Fuel measuring and air intake measuring arrangements |
| Electric supply | Single phase, 220 V, 5 A |
| Cooling water | Continuous supply, about 10 LPM |
| Fuel | 10 litres |
| Floor area | 3 m x 2 m |
| Also required | Tachometer for rpm measurement |
Experiments on the multi cylinder diesel engine test rig
The multi cylinder diesel engine test rig is used for the full set of engine performance calculations, from specific fuel consumption and brake horse power to volumetric, mechanical, indicated thermal and brake thermal efficiency, in IC engine laboratories.
- Determining specific fuel consumption
- Determining brake horse power
- Measuring volumetric efficiency
- Determining mechanical efficiency
- Determining indicated thermal efficiency and brake thermal efficiency
Scope of supply and ordering
The listing covers the multi cylinder four stroke water cooled diesel engine with dynamometer and the fuel and air intake measuring arrangements. The number of cylinders, engine rating and dynamometer type are confirmed on the quotation; a tachometer is listed as a utility. Accessories, spares and quantities are confirmed on the quotation.
Minimum order quantity, lead time and packing are confirmed on each quotation for the number of rigs and the delivery destination. JaincoLab supplies engine test rigs singly or as part of complete IC engine laboratories for colleges and tender orders.
Frequently asked questions
Which tests can be run on the rig?
Specific fuel consumption, brake horse power, volumetric efficiency, mechanical efficiency, indicated thermal efficiency and brake thermal efficiency.
What utilities does it need?
A single-phase 220 V, 5 A supply, continuous water at about 10 LPM, 10 litres of fuel, a tachometer and a floor area of 3 x 2 m.
Is the number of cylinders listed?
No. The number of cylinders, engine rating and dynamometer type are confirmed on the quotation.
Related products
- Single Cylinder Four Stroke Petrol Engine Test Rig
- Single Cylinder Two Stroke Petrol Engine Test Rig
- Separating and Throttling Calorimeter
- Marcet Boiler
Engine, steam and fluid engineering set-ups are listed in the JaincoLab fluid mechanics lab equipment range.
Request a quote
To order the Multi Cylinder Diesel Engine Test Rig, send the quantity and delivery destination through the JaincoLab contact page or email [email protected]. Institutions and contractors buying under a tender can also reach us via the tenders page.
