Firing Circuit Using OP AMPS And Gates
Product Code : JA-PET-1435
The firing circuit using op-amps and gates is a power electronics trainer for studying how firing pulses for a single-phase converter are generated with operational amplifiers and logic gates. It carries eight op-amp ICs, a quad 2-input AND gate IC, two NPN transistors, two 1:1 pulse transformers and three potentiometers, powered by 6 V AC and ±12 V DC regulated supplies (SKU JA-PET-1435).
Specifications
Listed parts and ratings of the op-amp firing board:
| Product | Firing Circuit Using OP AMPS And Gates |
| SKU | JA-PET-1435 |
| AC supply | 6 V AC at 100 mA |
| DC supply | ±12 V DC at 100 mA, fixed regulated |
| ICs | Eight op-amp ICs; quad 2-input AND gate IC |
| Transistors | Two NPN |
| Pulse transformers | Two, 1:1 |
| Controls | Three potentiometers |
| Mains | 230 V ±10%, 50 Hz AC; ON/OFF switch, fuse and jewel light |
| Patch cords | 4 mm stackable spring-loaded plugs, 0.5 m |
| Weight | 4 kg approx. |
| Dimensions | W 412 x H 150 x D 310 mm |
| Other apparatus required | Dual trace CRO 20 MHz (unearthed) |
| Optional load unit | 50 W isolation transformer, 40 W lamp and 400 V, 4 A SCR, with mains ON/OFF switch, fuse and jewel light |
Scope of supply and ordering
The listing covers the op-amp and gate firing circuit board with patch cords and operating instructions, supplied by JaincoLab; an optional load unit with an SCR, a lamp and an isolation transformer can be added. The quotation states the packing, the lead time and the number of units.
Frequently asked questions
What is studied on this firing circuit board?
The firing circuit for a single-phase converter built with op-amps and gates, which is its listed experiment.
How many op-amps does the board use?
Eight op-amp ICs, together with a quad 2-input AND gate IC and two NPN transistors.
What is needed besides the board?
A dual trace 20 MHz oscilloscope (unearthed); an optional load unit with a 50 W isolation transformer, a 40 W lamp and a 400 V, 4 A SCR is listed.
Related products
- Firing Circuit Using Ramp Comparator Scheme
- Firing Circuit Using Cosine Wave Scheme
- Single Phase Half Controlled Symmetrical
- SCR Triggering Circuit
Related items are grouped in the JaincoLab power electronics trainers range.
Request a quote
Quotations for the Firing Circuit Using OP AMPS And Gates are prepared on request through the JaincoLab contact page. Institutions and contractors buying under a tender can also reach us via the tenders page.
