Small Animal Incinerator
Product Code : JA-I-2431
The Small Animal Incinerator (SKU JA-I-2431), supplied by JaincoLab, is a gas-fired unit for disposing of animal carcasses. Its chamber temperature is controlled by a digital temperature controller, and it has an afterburner and an optional cremation burner. With an incineration rate of 22 kg per hour and a weight capability of 90 kg, this animal carcass incinerator suits veterinary facilities, animal houses and farms.
Specifications
The animal carcass incinerator is specified by an incineration rate of 22 kg/hour, a 90 kg weight capability, a 0.288 m3 chamber and the dimensions, gas pressures and power supply in the table. Burner ratings and installation needs are confirmed on the quotation.
| Product | Small Animal Incinerator |
| SKU | JA-I-2431 |
| Use | Disposal of animal carcasses |
| Incineration rate | 22 kg/hour |
| Weight capability | 90 kg |
| Chamber (L x W x H) | 0.8 x 0.6 x 0.6 m; 0.288 m3 |
| Overall length | 1.3 m (1.7 m with cremation burner) |
| Overall width | 1.0 m (1.3 m with control panel) |
| Overall height | 1.6 m (1.9 m with afterburner) |
| Weight | 2,358 kg |
| Gas pressure | Natural gas 1.7 kPa; propane 2.7 kPa |
| Power requirement | 110 V, single phase, 30 A |
| Lining | Firebrick walls / castable refractory hearth and ceiling; board insulation |
| Stack | 0.4 m O.D.; minimum height 4.5 m from grade |
| Control | Digital temperature controller |
Applications of the animal carcass incinerator
The incinerator is used where carcasses of small animals must be destroyed on site rather than buried or transported, which is common in veterinary and animal-keeping facilities.
- Veterinary hospitals and clinics
- Animal houses of research and teaching institutions
- Poultry and livestock farms
- Pet cremation and municipal animal control units
Scope of supply and ordering
The listing covers the Small Animal Incinerator with afterburner, digital temperature controller and stack sections; the cremation burner and control panel are shown as part of the overall dimensions. Handling, use and disposal must follow the regulations that apply to this material in the destination country. Accessories, spares and quantities are confirmed on the quotation.
MOQ, lead time and packing are confirmed on each quotation for the quantity and the delivery destination. The unit weighs about 2,358 kg, so the freight and unloading arrangements are agreed on the quotation.
Frequently asked questions
What load can it handle?
An incineration rate of 22 kg per hour, with a weight capability of 90 kg per charge.
Which fuel does it use?
Natural gas (1.7 kPa) or propane (2.7 kPa), with a 110 V, single-phase, 30 A power supply for the controls and blowers.
What air supply does the room need?
Outside air inlet louvers at or below burner height, able to pass about 1.17 cubic metres of air per second.
Related products
- Large Animal Incinerator
- Electronic Bio waste Medical Incinerator
- Bio Waste Oil Fired Medical Incinerator
- General Waste Incinerator
See the complete incinerator range from JaincoLab, including a larger electric unit for animal and health-care waste.
Request a quote
For a price on the Small Animal Incinerator, send the quantity, the type and daily amount of waste and the delivery destination through the JaincoLab contact page or email [email protected]. Quote the SKU JA-I-2431 so the enquiry is matched to this model. Institutions and contractors buying under a tender can also reach us via the tenders page.
