Microprocessor K.F. Moisture Titrator
Product Code : JA-MT-2207
The Microprocessor K.F. Moisture Titrator (SKU JA-MT-2207) determines water content by volumetric Karl Fischer titration, using a motorised dispensing system in place of a glass burette. It analyses liquids, powders, fine particles and fibres soluble in alcohol or solvents and shows moisture in ppm, per cent and mg H2O. This KF moisture titrator is supplied by JaincoLab to pharmaceutical and chemical laboratories.
Specifications
The titrator measures 10 ppm to 100% moisture, dispenses titrant at 0.01 ml resolution with 0.00 to 99.99 ml shown, calculates the KF titer factor automatically and signals the end point by LED and audible alarm.
| Product | Microprocessor K.F. Moisture Titrator |
| SKU | JA-MT-2207 |
| Measuring range | 10 ppm to 100% moisture |
| Method | Karl Fischer volumetric titration |
| Dispensing | Motorised dispensing system; resolution 0.01 ml; volume shown 0.00 to 99.99 ml |
| Result calculation | Automatic: % (0.00-100), ppm (10-9999999), mg H2O (0.00-999.99) |
| KF titer factor | Automatic calculation by repeated averaging |
| End point | Visual LED and audible alarm; wait time adjustable 1 to 59 s |
| Pump calibration | Through the keyboard |
| Keyboard | 24 soft-touch membrane keys with numeric keypad |
| Storage | Date, time, batch number and results of the latest 20 titrations (FIFO), battery backed |
| Display | 8-digit red 7-segment; built-in clock |
| Stirrer | Built-in magnetic stirrer, adjustable speed |
| Reagent bottles | 3 x 250 ml (KF reagent, methanol, calcium chloride) |
| Printer interface | External serial printer |
| Power | 230 V AC ±10%, 50 Hz |
| Dimensions | 360 x 295 x 175 mm |
Applications of the KF moisture titrator
Karl Fischer titration is the standard route to trace and bulk water content, so the titrator is used wherever moisture in raw materials, intermediates or finished products must be reported.
- Moisture in pharmaceutical raw materials and formulations
- Water content of solvents, oils and chemicals
- Moisture in food, sugar, paper and textile samples
- Pharmaceutical analysis practicals in B.Pharm and M.Pharm laboratories
Scope of supply and ordering
The listing covers the microprocessor KF moisture titrator; the source lists a dual platinum electrode, built-in magnetic stirrer, 250 ml methanol bottle and syringe among the accessories, and the full accessory list is confirmed on the quotation. KF reagent is not part of the listing. Accessories, spares and quantities are confirmed on the quotation.
Minimum order quantity, lead time and packing are confirmed on each quotation for the number of titrators and the delivery destination. JaincoLab supplies single titrators and sets for pharmaceutical, college and testing laboratories.
Frequently asked questions
What moisture range does it cover?
From 10 ppm up to 100% moisture by volumetric Karl Fischer titration.
In which units are results shown?
Moisture is calculated automatically in ppm, per cent and mg H2O.
Does it calculate the titer factor?
Yes. The KF titer factor is calculated automatically by repeated averaging.
Related products
- Auto Karl Fischer Titrimeter
- Microprocessor Potentiometer
- Digital Potentiometer
- Microprocessor pH System
Karl Fischer instruments are grouped in the JaincoLab moisture titrator range.
Request a quote
To order the Microprocessor K.F. Moisture Titrator, send the quantity and delivery destination through the JaincoLab contact page or email [email protected], quoting SKU JA-MT-2207. Institutions and contractors buying under a tender can also reach us via the tenders page.
