Logic Lab
Product Code : JA-BT-1484
The logic lab is a digital breadboard trainer with basic logic gate units built in: six each of AND, OR, NAND and NOR gates and three each of XOR and NOT gates. It adds a short-circuit-protected +5 V, -5 V and ±15 V supply, a pulse generator, four debounced logic switches, an 8-bit LED output indicator and a 2120 tie-point solder-less breadboard (SKU JA-BT-1484).
Specifications
The logic lab carries these units and ratings:
| Product | Logic Lab |
| SKU | JA-BT-1484 |
| Logic gates | AND x6, OR x6, NAND x6, NOR x6, XOR x3, NOT x3; input HI above 2.25 V, LO below 0.8 V |
| +5 V supply | ±5%, 1 A; line regulation below 50 mV; load regulation below 100 mV |
| -5 V supply | ±5%, 500 mA; line regulation below 25 mV; load regulation below 30 mV |
| ±15 V supply | ±5%, 500 mA; line and load regulation below 150 mV |
| Protection | Short circuit protection with indicator |
| Pulse generator | 1 s, 0.1 s and 0.01 s intervals; +5 V output |
| Logic switches | 4 debounced HI/LO |
| LED indicator | 8-bit output, max. input 15 V DC |
| Breadboard | 2120 tie points; all DIP sizes; AWG 22-30 (0.3-0.8 mm) wire |
| Accessories | Mains cord; instruction manual; red and black 2 mm patch cords with pin (10 each); pin-to-pin cords (10 each); 24/25 SWG wire, 1 m each in 5 colours |
Experimental coverage
The listed experiments include:
- Logic gate operation and the dual nature of logic gates
- De Morgan's theorem with Boolean logic equations
- Binary to Gray, Gray to binary and binary to excess-3 code conversion
- Binary adder, subtractor and multiplier
- EX-OR gate implementation and application
- RS and JK flip-flops
Scope of supply and ordering
The listing covers the logic lab with its patch cords, hook-up wire, mains cord and instruction manual, supplied by JaincoLab. Lead time and packing depend on the order size and are confirmed when we quote.
Frequently asked questions
Which logic gates are built into the logic lab?
Six AND, six OR, six NAND and six NOR gates, plus three XOR and three NOT gates.
What pulse intervals does the generator give?
1 s, 0.1 s and 0.01 s, with a +5 V output.
How large is the breadboard?
2120 interconnected tie points, fitting all DIP sizes and wire from AWG 22 to 30.
Related products
The breadboard trainer range lists further items of this kind.
Request a quote
Enquiries for the Logic Lab can be sent with the quantity needed through our contact page. For tender or project supply, see our tenders page.
