Hotplate Stirrer
Product Code : JA-LE-8189
The Hotplate Stirrer (SKU JA-LE-8189) heats and magnetically stirs liquids on one white, chemical-resistant ceramic top. This hotplate magnetic stirrer with ceramic top is set with two turn knobs that feed a microprocessor controller, covering 80 to 380°C and 60 to 1500 rpm. Front-panel LEDs show when heating or stirring is switched on, and a support rod is included for a thermometer or temperature probe. It is supplied by JaincoLab.
Specifications
The table gives the heating, stirring and size values listed for this model.
| Product | Hotplate Stirrer |
| SKU | JA-LE-8189 |
| Work surface | White ceramic, chemical resistant, 180 x 180 mm (7.1 x 7.1 in) |
| Temperature range | 80 to 380°C |
| Speed range | 60 to 1500 rpm |
| Controls | Microprocessor control with turn knobs; LED indicators for heating and stirring |
| Accessory included | Support rod for thermometers and temperature probes |
| Overall size (w x d x h) | 20 x 23 x 11.5 cm (8.5 x 10 x 4.5 in) |
| Weight | 4 kg |
| Electrical | 120 V 60 Hz or 230 V 50 Hz, 500 W |
| Ambient operating range | +4 to +65°C |
Uses of the hotplate magnetic stirrer
Its small footprint and dual function suit routine bench work such as:
- Heating and stirring solutions in borosilicate beakers, flasks and bottles
- Work on crowded benches or inside biological safety cabinets (about 8 x 9 in footprint)
- Heating with a thermometer or probe held on the supplied support rod
Scope of supply and ordering
One hotplate stirrer with its support rod makes up the listed item; state the mains voltage (120 V or 230 V) you need, and the quantity, packing and lead time will be set out on the quotation.
Frequently asked questions
What heating and stirring range does this hotplate stirrer cover?
It heats from 80 to 380°C and stirs from 60 to 1500 rpm, both set with turn knobs.
How large is the ceramic work surface?
The ceramic top measures 180 x 180 mm (7.1 x 7.1 in), which takes common sizes of borosilicate beakers, flasks and bottles.
Is a stand for a thermometer included?
Yes, a support rod for mounting thermometers and temperature probes comes with the unit.
Related products
More heating, stirring and mixing units are listed in our laboratory equipment range.
Request a quote
For the Hotplate Stirrer, send the quantity and mains voltage through our contact page. Tender and project enquiries can be sent through the tenders page.
